Filter
Top Products
158
Actiontec Wireless Broadband Router User Manual
159
Appendix A Quality of Service
To define a shaping class:
1. Click Add in the “Tx Traffic Shaping” section of the Edit Device Traffic
Shaping screen. The “Add Shaping Class” screen appears.
2. Name the new class and click Apply.
3. Click the class name to edit the shaping class. The “Edit Class” screen appears.
Configure the following parameters:
Name Enter the name of the class in this text box.
Class Priority The class can be granted one of eight priority levels, zero being the
highest and seven the lowest (opposite the rules priority levels). This level sets the
priority of a class in comparison to other classes on the device.
Tx Bandwidth Tx bandwidth is the reserved transmission bandwidth in kilobits
per second. The maximum allowed bandwidth can be limited by selecting Specify
from the drop-down list. The screen will refresh, adding another “Kbits/s” text
box. Enter the desired maximum allowed bandwidth.
Rx Bandwidth In the same manner, Rx bandwidth is the reserved reception
bandwidth, which can also be limited to a maximum allowed bandwidth.