Filter
Top Products
68
Actiontec Wireless Broadband Router User Manual
69
Chapter 5 Using Network Connections
Routing Table
Click New Route to generate the “New Route” window, where a new route can
be configured.
Additional IP Addresses
Click New IP Address to generate the “Additional IP Address Settings” screen, where
additional IP addresses can be created to access the Router via the connection.
WAN PPPoE/WAN PPPoE 2
WAN Point-to-Point Protocol over Ethernet (PPPoE) relies on two widely accepted
standards: Point-to-Point Protocol and Ethernet. PPPoE enables Ethernet net-
worked computers to exchange information with computers on the Internet. PPPoE
supports the protocol layers and authentication widely used in PPP and enables
a point-to-point connection to be established in the normally multipoint archi-
tecture of Ethernet. A discovery process in PPPoE determines the Ethernet MAC
address of the remote device in order to establish a session.
Click WAN PPPoE in the Network Connections screen to generate the “WAN
PPPoE Properties” screen. This screen displays a list of the connection’s proper-
ties. The only modifications that can be made from this screen are disabling the
connection (by clicking Disable) or renaming the connection (by entering a new
name in the “Name” text box).