Filter
Top Products
34
Actiontec Wireless Broadband Router User Manual
35
Chapter 4 Creating a Wireless Network
WPA
If WPA (Wi-Fi Protected Access) was selected, the “WPA Key”
screen appears.
1. Verify the authentication method selected is “Pre-Shared Key.”
2. Enter a phrase of at least eight characters in the “Pre-Shared Key” text box.
Verify that “ASCII” is selected in the associated drop-down list.
3. Select the proper encryption algorithm (TKIP or AES).
4. Click in the “Group Key Update Interval” check box to activate the group
key update interval, and set the interval time in the text box to the right.
5. Click Apply at the bottom of the screen to save changes.
Level 2 (SSID Broadcast)
This section is used to configure the Router’s SSID broadcast capabilities.