Filter
Top Products
SCPI Commands Quick Reference
Command Description
:NRAM
:ADDRess? Returns starting address of the User non-volatile RAM.
:CREate <
size>|MIN|MAX Creates a User non-volatile RAM segment.
:CREate? [MIN| MAX] Returns the current or allowable size of User NVRAM.
:PEEK? <
address>| MIN|MAX,< width> Returns an 8, 16, or 32 bit value from memory.
:POKE <
address>| MIN|MAX,< width>,< data> Stores an 8, 16, or 32 bit value to RAM.
:RDISk
:ADDRess? Returns the starting address of an IBASIC RAM volume.
:CREate <
size>|MIN|MAX Allocates RAM for an IBASIC RAM volume.
:CREate? [MIN| MAX] Returns the current or allowable size of the RAM vol.
:UPLoad
[:MADDress]? < address> ,< byte_count> Returns data from non-volatile user RAM starting at address.
:SADDress? < address> , < byte_count> Returns data from non-volatile user RAM at address.
INITiate
[:Immediate] Enables trigger system to start Pacer.
[SOURce]
:PULSe
COUNt < numberic value> Sets number of Pacer pulses per trigger.
COUNt? [MIN| MAX] Returns current count, or MIN| MAX allowed value.
:PERiod < numeric value Sets Pacer pulse period in seconds.
:PERiod? [MIN\MAX] Returns the current or allowable period value.
STATus
:OPERation
:CONDition? Returns the state of the condition register.
:ENABle 256 Set Standard Operation Enable Register mask.
:ENABle? Returns value of enable mask.
[:EVENt]? Returns value of the bit set in the Event register (Standard Operation
Status Group).
:PRESet Presets status registers
:QUEStionable
:CONDition? Always returns + 0.
:ENABle <
mask> Set Questionable Status Register enable mask.
:ENABle? Returns value of enable mask.
[:EVENt]? Always returns + 0.
System Instrument
7–76 Command Quick Reference