Filter
Top Products
Setting the System Date and Time
Page 9-12
4) Daylight Savings Time active
Enables and disables
DST (Daylight Savings Time). To enable DST, enter:
4=Enable
To disable DST, enter:
4=Disable
If DST is disabled, options 41-49 will not be displayed.
41) DST Start Month
Indicates which month of the year
DST starts. To set the month when DST should start, enter
the sequential number of the month (January=1, February=2, . . . December=12). For exam-
ple, if you want DST to begin in April, you would enter the line number for DST Start Month
(41) and the month, as follows:
41=4
42) DST Start Week
Indicates which week in a month
DST starts. To set the week DST should start, enter the
sequential number of the week. The possible values are 1st (1), 2nd (2), 3rd (3), 4th (4), and
Last. For example, if you want DST to start on the 3rd Tuesday of a month, you would enter
the line number for DST Start Week (42) and the week, as follows:
42=3
43) DST Start Day
Indicates which day of the week
DST starts. To set the day DST should start, enter the sequen-
tial number of the day (Sunday=1, Monday=2, . . . Saturday=7). For example, if you want DST
to begin on Friday, you would enter the line number for DST Start Day (43) and the day, as
follows:
43=6
44) DST Start Time
Indicates what time of day (in local time)
DST starts. To set the time DST should start, enter
the time in the form HH:MM, where HH is the clock hours of a 24 hour (military) clock and MM
is the clock minutes that DST should start. For example, if you want DST to start at 1:00 a.m.,
you would enter the line number for
DST Start Time (44) and the time, as follows:
44=1:00
45) DST End Month
Indicates which month of the year
DST ends. To set the month DST should end, enter the
sequential number of the month (January=1, February=2, . . . December=12). For example, if
you want
DST to end in April, you would enter the line number for DST End Month (45) and
the month, as follows:
45=4