Filter
Top Products
NTP Access Control Menu
Page 12-38
Remove One or More Key ID's from the Trusted List
The trusted list in the key file is a list of all keys that are considered authentic and uncompro-
mised. Messages from an NTP entity using one of these keys are accepted and acted upon. It
is possible to remove a key from the trusted list.
To remove a key ID from the trusted list, enter the
ntpdkey command as shown:
ntpdkey <value>
where <value> is the new key ID to be remove from the trusted list. For example, to remove
key ID 5 from the trusted list, enter the following:
ntpdkey 5
A brief message is displayed confirming the operation.
♦ Note ♦
Removing a key
ID using the ntpdkey command
removes the key from the working version of the key
file in the switch’s RAM. If you reset the switch or re-
initialize NTP, the removed key is reinstated.
Display the State of the Authentication Code
The ntpauth command allows you to look at the statistics of the authentication routine. These
statistics consist of counters for various functions of the authentication code.
To view the statistics of the authentication code, enter the
ntpauth command at the system
prompt. A screen similar to the following is shown:
time since reset: 0
key lookups: 0
keys not found: 0
uncached keys: 0
encryptions: 0
decryptions: 0
Field Descriptions
The following sections explains the fields displayed using the ntpauth command.
time since reset. The number of seconds since the last restart of the switch.
key lookups. The number of times the switch has examined the key file to find a key.
keys not found. The number of times the switch failed to find a key in its key file.
uncached keys. The number of keys added to the key file using the ntpckey command.
encryptions. The number of times the switch sent NTP messages or information out in
encrypted form.
decryptions. The number of times the switch received NTP messages of information that was
encrypted, and successfully decrypted the information.