Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
251
Troubleshooting
the Radios
If you are having problems communicating with your wireless network, you
can use the access point LEDs, error messages, Radio MAC Ping, or
ICMP Echo to troubleshoot any radio problems.
Using LEDs
If the access point LEDs show the following pattern after it boots, the radio
may be faulty or the configuration matrix string is incorrect. Contact your
local Allied Telesyn representative to help you correct the problem.
Using a Communications Program or a Telnet Session
If you are communicating with the access point using a communications
program or a telnet session, an error message may appear on your PC
after the access point reboots or when a session is saved. The error
messages are described in the following table. Contact your local Allied
Telesyn representative to help you correct the problem.
Table 72. AT-WA7500 and AT-WA7501 LEDs
or
(Blinks for
wired data
traffic.)
or
(Blinks if the
AP
becomes
root.)
LED On LED Off
LED Flashing