Filter
Top Products
AT-WA7500 and AT-WA7501 Installation and User’s Guide
71
To configure the access point as a DHCP server
1. From the menu, click TCP/IP Settings. The TCP/IP Settings screen
appears.
2. Verify that the IP Address field, IP Subnet Mask field, and IP Router
field are configured. For help, see “Configuring the TCP/IP Settings” on
page 65.
3. Configure the DHCP parameters to make this access point a DHCP
server. For help, see the next table.
Table 15. DHCP Server Parameter Descriptions
Parameter Explanation
DHCP Mode Choose This AP is a DHCP Server. The access
point must have a valid IP address and subnet
mask.
DHCP Server
Name
Enter the name for this access point as a DHCP
server.