Filter
Top Products
x510DP-52GTX Installation Guide
17
Power Supply
Modules
The AT-x510DP-52GTX switch has two rear slots for hot-swappable
power supplies. Power supply options are:
For AC power with back-to-front air flow, one or two AT-PWR100R
power supplies
For AC power with front-to-back air flow, one or two AT-PWR250
power supplies
For DC power with back-to-front air flow, one or two
AT-PWR250R-80 power supplies
Stacking Slots Two SFP+ slots can be used with special stacking transceivers to create a
VCStack of up to four switches that operate as a virtual switch. Here are
the basic features of the stacking slots on the AT-x510DP-52GTX switch:
Two stacking ports per switch
40Gbps stacking bandwidth
LEDs Here are the port LEDs:
Duplex mode and link/activity LEDs for the twisted pair ports
Link/activity LEDs for the SFP+ slots
Stack ID number LED
eco-friendly button turns off the LEDs to conserve electricity
Installation
Options
Here are the installation options for the switches:
19-inch equipment rack - horizontal or vertical mounting
Desk or tabletop
MAC Address
Table
Here are the basic features of the MAC address tables of the switches:
Storage capacity of 16,000 dynamic MAC address entries
Storage capacity of 256 static MAC address entries
Automatic learning and aging
Management
Software and
Interfaces
Here are the management software and interfaces:
AlliedWare Plus Management Software
Command line interface
Web browser interface
Management
Methods
Here are the methods for managing the switches:
Local management through the Console port
Remote Telnet and Secure Shell management
Remote HTTP and HTTPS web browser management
SNMPv1, v2c, and v3