Filter
Top Products
UDM-0404 Multi-Format Distribution Hub
2
UDM-0404 Endeleo Multi-Format Distribution Hub
Compatibility
The UDM-0404 is compatible for use with UDM-RX01 (FG-UDM-RX01) and UDM-RX02
(FG-UDM-RX02) Receivers.
Product Specifications
Common Mode Sync delivery is supported only on the UDM-RX02.
UDM-0404 Specifications
Power Requirements: • 90-264V AC, 50/60Hz
• Max power consumption: 130W
Front Panel Components
IR Sensor: Infrared receive port (IRRX) for learning IR remote control functions from IR con-
trolled devices.
Outputs: 4 RJ-45 ports for connection to Endeleo UDM-RX02 Receivers (via Cat5, Cat5e
or Cat6).
Rear Panel Components
Network Port: RJ-12 10 BaseT network port is provides network connectivity.
Serial Port: RJ-12 port allows an administrator to control various functions from a command
line prompt.
IRTX Ports: 2 Infrared Transmit (IRTX) ports allow the UDM-0404 to control IR devices via IR
emitters attached to the UDM. The IR cable is attached to the IR panel of the con-
trolled device to receive IR commands issued through the software or remote
control.
Input Connectors (A-D): 4 sets of Input connections for up to 4 A/V inputs with the following connectors:
• Video
• Audio Left
• Audio Right
• SPDIF
IEC Power Connector: Universal switch-mode power supply.
• As a Class 1 appliance the UDM-0404 should be connected to a mains supply
with a protective earthing connection.
• The Power On/Off switch is located beside the IEC power connector.
Note: The rating label found beneath the IEC connector contains important
information applicable to the UDM-0404’s installation environment.
Network Interface: 10baseT
Serial Interface: 9600, 8, N, 1
Max Video Input: • 4 x RGBHV (or)
• 4 x S-Video (or)
• 12 x CVBS (plus)
Operating Environment: • 35°F - 95°F (5°C - 35°C)
• Max. relative humidity - 85% (non-condensing)
Dimensions (HWD):
1 3/4" x 19" x 12 1/2" (45 mm x 440 mm x 320 mm)
Weight:
8.8 lb. (4 Kg)
Certifications: • CE/UL/FCC part 15 Class A