Filter
Top Products
Configuration - Schedule Page
52
UDM-0404 Endeleo Multi-Format Distribution Hub
Scheduled Input Controls - Use the Schedule options in the top toolbar of the Status page to
schedule inputs (devices connected to the Input connectors on the rear panel of the UDM) to
be displayed on specific Ports (via the UDM receivers connected to the Output ports on the
front of the UDM) at specified times. For example, you could create a scheduled input event
that causes the device connected to Input A to automatically display on Port 1 every day at
9:00am.
See the Scheduling Inputs section on page 57 for details.
Preset Scheduling - Multiple scheduled events can be combined into a single Preset
Schedule. For example, you could create a Preset Schedule that powers up devices 1-4
(connected to the IRTX Ports on the rear panel), then powers up display devices 1-4
(connected to the RJ-45 Output ports on the front panel), and displays Inputs 1-4 on Ports 1-4.
See the Preset Scheduling section on page 60 for details.
Checking the Hub Time
Click on the date and time at the top-right of the Status page to refresh the UDM’s internal clock to the
current time (FIG. 54). This can be useful before creating a scheduled event.
Scheduling IR Device Control Events
Use the Schedule options in the Devices page (bottom toolbar) to create a scheduled IR Device Control
Event (FIG. 55):
FIG. 54 Hub Date and Time
FIG. 55 Devices page
IR Device Control toolbar