Filter
Top Products
Configuration - Protocols Page
64
UDM-0404 Endeleo Multi-Format Distribution Hub
Creating a Serial Protocol
1. Open the Serial Protocol drop-down menu, and select New (FIG. 87).
This action invokes several additional fields: Name, Settings and Initialise (FIG. 88):
2. Name the serial protocol appropriately and assign the protocol Settings (baud rate and parity).
3. Click on Initialise to clear the UDM Receiver of any pre-loaded serial commands, and invoke the
Action options shown in FIG. 89.
4. Select an Action to be performed from the Action drop-down menu (FIG. 90).
5. Enter the serial command (serial string) equivalent for this action in the Serial command text field.
FIG. 87 Serial Protocol drop-down menu
FIG. 88 Creating a new serial protocol
When configuring the serial settings "OP" means Odd, Parity and "EP" means Even,
Parity.
FIG. 89 Creating a serial command for the action
FIG. 90 Creating a serial command for the action
Type the serial command string associated
with the selected Action in this text field
Click to add this Action/Serial command
string to the new Serial protocol
The serial string which reflects the action has to be accurate for the serial command
to work. Consult the Manufacturer’s web site or documentation to ascertain the
correct string for this serial device.