Filter
Top Products
Configuration - Schedule Page
51
UDM-0404 Endeleo Multi-Format Distribution Hub
Configuration - Schedule Page
Overview
The UDM-0404 features an on-board clock that allows you to create scheduled events to be executed at a
predetermined time in the future. Scheduled events are listed on the Schedule page (FIG. 53), but are
created using options in both the Status and Devices pages, as described in this section.
There are several basic types of scheduled events:
Scheduled IR Device Controls - Use the Schedule options in the Devices page to schedule
events to be executed at specified times on IR-controlled devices connected to the IRTX (IR
Transmit) Ports on the rear panel (see the TX (IR Transmit) Ports section on page 11). For
example, you could create a scheduled device event that causes the devices connected to TX
Ports 1-4 to power-up and/or power-down at scheduled times each day.
See the Scheduling IR Device Control Events section on page 52 for details.
Scheduled Output Device Control - Use the Schedule options in the bottom toolbar of the
Status page to schedule events to be executed at specified times on display devices connected
to the RJ-45 Output ports on the front panel (see the OUTPUT Ports (RJ-45) section on
page 7). For example, you could create a scheduled port control event that causes the display
devices connected to Outputs 1-4 to power-up and/or power-down at scheduled times each
day.
See the Scheduling Output Device Control Events section on page 55 for details.
FIG. 53 Schedule page
You can create and store up to 16 scheduled events.