Filter
Top Products
Wiring and Connections - UDM Receivers
23
UDM-0404 Endeleo Multi-Format Distribution Hub
Powering on the UDM-RX02
The UDM-RX02 may be powered by its hub device through a standard CAT5 cable, but it may also be
powered through an optional 24 VDC power supply (FG-UDM-PS) intended to augment power for very
long cable runs.
To connect the UDM Receiver to the optional power supply, insert the barrel connector of the power
supply into the power connector on the UDM Receiver (see FIG. 13 on page 20).
To power down the UDM-RX02, remove the barrel connector of the power supply from the power
connector and then remove the Ethernet cable from the UDM Hub connector.
System Overview
FIG. 14 provides a basic system diagram representing a UDM Hub, UDM Receiver, and connected
devices:
As a Class 1 appliance, ensure the device is connected to a main socket outlet with a
protective grounding connection.
Disconnecting the optional power supply will not power down the UDM-RX02 if its
Ethernet connection to the UDM Hub is intact.
FIG. 14 UDM System Diagram
DVD DSS
UDM Hub
UDM Receiver
Display
Ethernet
(network
Cat5
Video Out
Video In
Audio Out
Audio In
Video In Audio In
Video Out
Audio Out
Video Out
Video In
Audio Out
Audio In