Filter
Top Products
Wiring and Connections
15
UDM-0404 Endeleo Multi-Format Distribution Hub
Powering the UDM-0404 On
1.
Ensure a standard PC mains lead has been connected to the 3-pin power connection, and then
connected to a mains power source.
2. Flip the power switch down to its On (|) position.
Powering the UDM-0404 Off
To turn the UDM-0404 off, flip the Power switch to it’s Off (0) position.
As a Class 1 appliance the UDM-0404 should be connected to a mains supply with a
protective earthing connection.
Where a mains plug (or appliance coupler) is used in the event of a fault, the
UDM-0404 can be disconnected from the mains by removing the lead from the IEC
inlet or from the mains socket.
It is important that the UDM-0404 is installed in such a way that this method remains
readily operable.
The user should have easy access to either the IEC inlet or the mains socket in the
event of a fault.