Filter
Top Products
Configuration - Status Page
30
UDM-0404 Endeleo Multi-Format Distribution Hub
Advanced Video Compensation
To enable advanced video compensation options, click on the Enable advanced options checkbox, in the
Setup page (FIG. 20).
1. In the Status page, click on a Port link to access the Port Configuration options for the selected Port
(see FIG. 18 on page 28).
2. With the Enable advanced options checkbox selected in the Setup page, the Port Configuration
options include the additional Cable Distance field (FIG. 21):
3. In the Cable Distance field, enter the approximate distance of the cable run from the UDM-0404 to
the UDM Receiver (in meters). This value is used to automatically adjust the brightness and
sharpness of the image.
4. To make manual adjustments to Brightness and Sharpness, click on the Advanced checkbox (see
FIG. 21) to enable the Bright and Sharp fields (FIG. 22):
FIG. 20 Setup Page - Enable advanced options checkbox
FIG. 21 Port Configuration options - with "Enable advanced options" selected in the
Setup
page
Enter approximate distance of
the cable run between the UDM
hub and UDM Receiver in meter
Click to enable "Bright" and "Sharp"
fields for manual adjustments
Click to enable "Dual Output"
mode on this Port
The Cable Distance field is intended primarily for use with VGA cabling in excess of
200 meters (see the Audio & Video Formats/Resolutions/Distance section on
page 12).