Filter
Top Products
Configuration - Status Page
34
UDM-0404 Endeleo Multi-Format Distribution Hub
Changing an Input
The input being displayed at a Port can be changed at any time via the Input drop-down menu. To change
multiple ports select/include those ports appropriately.
User Control
Administrators can issue commands directly from the UDM WebConsole, via the User Control options
in the Status page (FIG. 29).
Commands can be issued in multiple ways:
The Control toolbar located at the bottom of the Status page for the selected port(s).
The Control drop-down options for the relevant port
The User Control options for a selected port (click the relevant Port’s link to access User
Control options).
FIG. 28 Ports re-configured to use the "Included" input ("A1")
FIG. 29 User Control options
Click to select a command from a list
of supported controls for each Port
Click to issue one or two commands
to the selected Port(s)
Click to access User Control
options for each Port
Schedules are also used to issue commands at a pre-determined time to inputs and
devices. Refer to the Configuration - Schedule Page section on page 51 for details.