Filter
Top Products
Configuration - Status Page
39
UDM-0404 Endeleo Multi-Format Distribution Hub
Configuring a Port for Passthrough Mode
1.
Click on a Port link for the correct port to access the Port Configuration options (see FIG. 31 on
page 36).
2. Select the Remote Control that will be used to put the device into passthrough mode from the
Remote type drop-down menu (FIG. 36).
3. Click on the Passthrough checkbox for the key dedicated to putting the Receiver into Passthrough
Mode.
4. The device can now be controlled directly at the Receiver end.
Using Passthrough Mode
Once a device has been configured for Passthrough Mode the relevant remote control is used to control
the device.
Press the previously configured key on the relevant remote control (UDM-RX01 or Sky remote control)
to enter passthrough mode.
If accessing a Sky Box through passthrough, click on the Sky button on the Sky remote
control. Now use the Sky Remote control as normal. (Press TV on the Sky remote to exit
passthrough mode).
If accessing a DVD player through passthrough, click on the relevant button on the DVD
remote control to play, pause, stop eject etc. Use the DVD Remote control as normal.
If accessing an Endeleo TVM Hub through passthrough, click on the Up or Down channel on
the TVM remote control, to toggle between channels.
Exiting Passthrough Mode
Press any key on the UDM-RC02 remote which is not configured as a control enabled key.
If accessing a Tivo or Sky set-top box press TV on the Tivo or Sky remote.
FIG. 36 Remote type drop-down menu