Filter
Top Products
Wiring and Connections
7
UDM-0404 Endeleo Multi-Format Distribution Hub
Wiring and Connections
UDM-0404 Front Panel Components
The components on the front panel of the UDM-0404 are described below (FIG. 4).
IR Learning Sensor
An IR receive port is found at the front of the UDM-0404 to the left-hand side (see FIG. 4). This is used
to learn device IR remote control functions from devices such as DVD players, VCRs etc. Common
functions learned include Power on, Power off, Play, Pause, Stop, etc.
Refer to the Configuration - Protocols Page section on page 63 for details.
OUTPUT Ports (RJ-45)
The four RJ-45 ports on the front panel of the UDM (labelled “1-4”) provide connectivity to
UDM-RX02 Multi-Format Receivers. This is a standard RJ-45 connector, and UDM Receivers can be
connected via either Cat5, Cat5e or Cat6 cabling (FIG. 5).
UDM Port Pinouts
The following table describes the pinout configuration of the UDM ports:
FIG. 4 UDM-0404 - Front Panel Components
FIG. 5 RJ-45 Pinouts
UDM Port Pinouts
Pair Color RJ45 Pin Polarity Endeleo Function
1
White / Blue 5 -
Green
Blue 4 +
2
White / Orange 1 +
Red
Orange 2 -
3
White / Green 3 +
Blue
Green 6 -
4
White / Brown 7 +
Bi-Directional Control, Digital Audio, Phantom Power
Brown 8 -, Gnd
IR Learning Sensor
4 RJ45 Output Ports for connection
to UDM-RX02 Receivers