Filter
Top Products
Configuration - Setup Page
43
UDM-0404 Endeleo Multi-Format Distribution Hub
Restoring Hub Configuration and Connections
To ensure the configuration settings for the Hub are retained each time the hub boots it is advisable to
ensure the Restore options at the bottom of the Setup page have been enabled (FIG. 41).
Restoring Configuration and Connections
To ensure network configuration and port configuration are restored on boot up select Restore
configuration on power up option (see FIG. 41).
Restoring Connections On Power Up
To ensure inputs are transmitted to the outputs (or ports) on boot up select the Restore connections on
power up option (see FIG. 41).
Resetting the UDM-0404
Where appropriate the Hub can be reset from the Browser interface. Use the Setup option to reset the
Hub.
1. Click the Reset Hub button (see FIG. 41).
The UDM-0404’s network connection will be lost temporarily and video displays will switch off
then on again very quickly.
2. Restart the Hub.
FIG. 41 Restore options
Failure to select the Restore Configuration and Connection options will mean if the
Hub is reset the Hub configuration and connections will need to be re-configured.
A power down of the Hub must be performed to complete the reset procedure.