Filter
Top Products
CHAPTER 4
Network Setup Protocol Structures and Data Types
Protocol Structures 113
InetHost fIPAddress;
InetHost fSubnetMask;
Str32 fAppleTalkZone;
UInt8 pad2;
UInt8 path[kMaxPortNameSize];
UInt8 module[kMaxModuleNameSize];
UInt32 framing;
};
Field descriptions
fCount A value that is always 1 in the current versions of Open
Transport.
pad1 A pad byte. Remove this pad byte when you pack this
structure.
fConfigMethod The configuration method. For possible values, see the
section OTCfgTCPConfigMethod (page 162).
fIPAddress The IP address that has been assigned to this interface.
fSubnetMask The subnet mask.
fAppleTalkZone The AppleTalk zone for this interface. Remove trailing
bytes when you pack this structure.
pad2 A pad byte. Remove this pad byte when you pack this
structure.
path The name of the port over which this interface
communicates.
module The name of the module that controls the port over which
this interface communicates.
framing Ethernet framing options. Constants are defined in the file
“OpenTransportProviders.h,” an OpenTransport header
file.
The preference type for OTCfgTCPInterfacesUnpacked is
kOTCfgTCPInterfacesPref, which is defined as 'iitf'.