Filter
Top Products
CHAPTER 4
Network Setup Protocol Structures and Data Types
136 Protocol Structures
struct OTCfgRemotePassword {
UInt8 data[256];
};
typedef struct OTCfgRemotePassword OTCfgRemotePassword;
data
The encrypted password. Call OTCfgEncrypt (page 93) to
encrypt the password.
The preference type for this preference is kOTCfgRemotePasswordPref, which is
defined as 'pass'.
OTCfgRemoteServer 4
The OTCfgRemoteServer structure stores an array of port configuration IDs used
to locate the configuration for a particular port.
struct OTCfgRemoteServer {
UInt32 version;
SInt16 configCount;
SInt16 configIDs[1];
};
version
Depending how the preference was constructed, version
may be kOTCfgRemoteDefaultVersion or
kOTCfgRemoteAcceptedVersion. When reading the version
field, accept either value. When writing the version field,
set it to kOTCfgRemoteDefaultVersion.
configCount The number of active Remote Access server configurations.
Must be 1 for the personal server.
configIDs Array of port configuration IDs. For the personal server,
there can be only one port configuration ID whose value is
zero.
The preference type for this preference is kOTCfgRemoteServerPref, which is
defined as 'srvr'.