Filter
Top Products
CHAPTER 4
Network Setup Protocol Structures and Data Types
Protocol Structures 153
redefined as a flag, with zero meaning inactive and non-zero meaning active.
However, the default preferences were not updated to reflect this change. So, it
is possible to see the following values stored in this field:
typedef UInt8 OTCfgATalkUnloadOptions
enum {
kOTCfgATalkInactive = 0,
kOTCfgATalkDefaultUnloadTimeout = 5,
kOTCfgATalkActive = 0xFF
};
When reading, treat a value of zero as meaning that AppleTalk is inactive, and
treat any non-zero values as meaning that AppleTalk is active. When writing,
set fLoadType to kOTCfgATalkInactive or kOTCfgATalkActive. Never set fLoadType
to kOTCfgATalkDefaultUnloadTimeout.
No preference type is defined for the OTCfgATalkGeneralDDP structure. Instead,
access this structure through the OTCfgATalkGeneral (page 145) structure, which
has a preference type of kOTCfgATalkGeneralPref.
OTCfgATalkGeneralNBP 4
The OTCfgATalkGeneralNBP structure defines parameters for the Name Bind
Protocol (NBP) component of the AppleTalk protocol stack and is a
sub-structure of the OTCfgATalkGeneral structure.
struct OTCfgATalkGeneralNBP
{
UInt16 fVersion;
UInt16 fSize;
UInt32 fTSDUSize;
UInt32 fDefaultRetryInterval;
UInt32 fDefaultRetryCount;
Boolean fCaseSensitiveCompare;
UInt8 fPad;
};
Field descriptions
fVersion Must be 1.