Filter
Top Products
CHAPTER 4
Network Setup Protocol Structures and Data Types
130 Protocol Structures
securityDataLength Must be zero.
securityData Must be zero.
The preference type for OTCfgRemoteConnect is kOTCfgRemoteConnectPref, which
is defined as 'conn'.
OTCfgRemoteDialAssist 4
The OTCfgRemoteDialAssist structure stores area and country code information
used by the Dial Assist facility.
struct OTCfgRemoteDialAssist {
UInt32 version;
UInt32 isAssisted;
Str31 areaCodeStr;
Str31 countryCodeStr;
};
typedef struct OTCfgRemoteDialAssist OTCfgRemoteDialAssist;;
Field descriptions
version Depending how the preference was constructed, version
may be kOTCfgRemoteDefaultVersion or
kOTCfgRemoteAcceptedVersion. When reading the version
field, accept either value. When writing the version field,
set it to kOTCfgRemoteDefaultVersion.
isAssisted Set isAssisted to zero for no assistance (the default); set
isAssisted to 1 to use Dial Assist. When isAssisted is set to
zero, areaCodeStr and countryCodeStr are ignored.
areaCodeStr A string containing an area code that is to be dialed as part
of the sequence for making a connection.
countryCodeStr A string containing a country code that is to be dialed as
part of the sequence for making a connection.
The preference type for this preference is kOTCfgRemoteDialAssistPref, which is
defined as 'dass'.