Filter
Top Products
18
2.10 Restoring Factory Defaults
If you ever need to restore the switch to its factory default settings, follow the commands shown in the
following screen.
Router> enable
Router# reload ?
factory-default Reset ALL system parameters to factory default
<cr>
Router# reload factory-default
The switch is now ready for configuration. Refer to the following chapters for management and configuration
information.
2.11 System Boot Parameters
The IC35516 has two boot banks to store its runtime code. You can select which bank will be used for the
next boot with the following command:
Router(config)# boot system flash {bank1|bank2}