Filter
Top Products
53
DVMRP must be enabled on the router for this command to be operational.
Command Purpose
probe-interval <5–30 seconds>
Defines how often neighbor probe messages are sent to
the ALL-DVMRP-ROUTERS IP multicast group address.
Default value: 10 seconds
Prune-age
This value defines how long a prune state will remain in effect for a source-routed multicast tree. After the
prune age period expires, flooding will resume.
DVMRP must be enabled on the router for this command to be operational.
Command Purpose
prune-age <20–8000 seconds>
Defines how long a prune state will remain in effect for a
source-routed multicast tree. After the prune age period
expires, flooding will resume.
Default value:
180 seconds
Report-interval
This value defines how often routers will propagate their complete routing tables to other neighbor DVMRP
routers.
DVMRP must be enabled on the router for this command to be operational.
Command Purpose
report-interval <10–2000 seconds>
Defines how often routers will propagate their
complete routing tables to other neighbor DVMRP
routers.
Default value:
60 seconds
Route-discard-timeout
This value defines the period of time before a route is deleted on a DVMRP router.
DVMRP must be enabled on the router for this command to be operational.
Command Purpose
route-discard-timeout <40–8000seconds>
Defines the period of time before a route is
deleted on a DVMRP router.
Default value:
340 seconds
Route-expire-timeout
This value defines how long a route is considered valid without the next route update.
DVMRP must be enabled on the router for this command to be operational.
Command Purpose
route-expire-time <20–4000 seconds >
Defines how long a route is considered valid
without the next route update.
Default value: 200 seconds