Filter
Top Products
8
1.4.2 IC35516-G
The front panel of the IC35516-G contains the following: power and port LEDs; 12 GBIC ports; 4 dual-
function Gigabit ports that support either 1000BaseT or GBIC-style Gigabit Ethernet ports; and a console
port.
The back panel, shown below, contains a 12 VDC jack for emergency power (optional), the primary power
bay cover plate, the on/off switch, and the primary power outlet.
1.5 Management and Configuration
The switch is managed using Command Line Interface (CLI) in order to access several different command
modes. Entering a question mark (?) at each command mode’s prompt provides a list of commands.
Console Interface
Support for local, out-of-band management is delivered through a terminal or modem attached to the
EIA/TIA-232 interface. Users can access the switch by connecting a PC or terminal to the console port of the
switch, via a serial cable. The default password set on the console line is Asante (it is case-sensitive). The
default IP address is 192.168.0.1/24. The default settings for the terminal emulation program are as follows:
9600-8-N-1
Remote in-band management is available through Simple Network Management Protocol (SNMP) and
Telnet client. When connecting via a Telnet session (line vty0) the default password is also Asante (case-
sensitive).
See Chapter 2 for more information on connecting to the switch.