Filter
Top Products
66
Use any of the following commands in top mode.
Command Purpose
show arp [interface]
Display the entries in the ARP table.
show access-lists [access-list-
name]
Display the contents of one or all current access
lists.
show ip prefix-list [prefix-list-name]
Display the contents of current IP prefix lists.
show ip protocols
Display active IP routing protocol statistics.
show ip irdp
Display IRDP values.
show ip route [bgp | rip | ospf |
connected | kernel | static | address
| prefix]
Display the current state of the routing table.
ping {host | address}
Test network node reach-ability.
traceroute
{host | destination}
Trace packet routes through the network.