Filter
Top Products
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 Series
5-15-1
5-15-1
5-1
5.1 Setting up RAID
The motherboard comes with the following RAID solutions:
NCLV-D2/SATA modelNCLV-D2/SATA model
NCLV-D2/SATA modelNCLV-D2/SATA model
NCLV-D2/SATA model
•
LSI Logic Embedded SATA RAID LSI Logic Embedded SATA RAID
LSI Logic Embedded SATA RAID LSI Logic Embedded SATA RAID
LSI Logic Embedded SATA RAID controller in the Intel
®
6300ESB
Southbridge supports up to two SATA hard disk drives and RAID 0 or
RAID 1 configuration.
•
AdaptecAdaptec
AdaptecAdaptec
Adaptec
®®
®®
®
AIC-8130 PCI-X SATAII AIC-8130 PCI-X SATAII
AIC-8130 PCI-X SATAII AIC-8130 PCI-X SATAII
AIC-8130 PCI-X SATAII controller supports four SATA
hard disk drives and RAID 0, RAID 1, and RAID 0+1 configurations.
NCLV-DS2 modelNCLV-DS2 model
NCLV-DS2 modelNCLV-DS2 model
NCLV-DS2 model
•
LSI Logic Embedded SATA RAID LSI Logic Embedded SATA RAID
LSI Logic Embedded SATA RAID LSI Logic Embedded SATA RAID
LSI Logic Embedded SATA RAID controller in the Intel
®
6300ESB
Southbridge supports up to two SATA hard disk drives and RAID 0 or
RAID 1 configuration.
•
AdaptecAdaptec
AdaptecAdaptec
Adaptec
®®
®®
®
AIC-7901X PCI-X SCSI AIC-7901X PCI-X SCSI
AIC-7901X PCI-X SCSI AIC-7901X PCI-X SCSI
AIC-7901X PCI-X SCSI controller supports SCSI hard disk
drives and RAID 0, RAID 1, and RAID 0+1 configurations.
5.1.15.1.1
5.1.15.1.1
5.1.1
RAID definitionsRAID definitions
RAID definitionsRAID definitions
RAID definitions
RAID 0RAID 0
RAID 0RAID 0
RAID 0
(Data striping)
optimizes two identical hard disk drives to read and
write data in parallel, interleaved stacks. Two hard disks perform the same
work as a single drive but at a sustained data transfer rate, double that of
a single disk alone, thus improving data access and storage. Use of two
new identical hard disk drives is required for this setup.
RAID 1RAID 1
RAID 1RAID 1
RAID 1
(Data mirroring)
copies and maintains an identical image of data from
one drive to a second drive. If one drive fails, the disk array management
software directs all applications to the surviving drive as it contains a
complete copy of the data in the other drive. This RAID configuration provides
data protection and increases fault tolerance to the entire system. Use two
new drives or use an existing drive and a new drive for this setup. The new
drive must be of the same size or larger than the existing drive.
RAID 0+1RAID 0+1
RAID 0+1RAID 0+1
RAID 0+1 is
data striping
and
data mirroring
combined without parity
(redundancy data) having to be calculated and written. With the RAID 0+1
configuration you get all the benefits of both RAID 0 and RAID 1
configurations. Use four new hard disk drives or use an existing drive and
three new drives for this setup.
JBODJBOD
JBODJBOD
JBOD
(Spanning)
stands for
Just a Bunch of DisksJust a Bunch of Disks
Just a Bunch of DisksJust a Bunch of Disks
Just a Bunch of Disks and refers to hard
disk drives that are not yet configured as a RAID set. This configuration
stores the same data redundantly on multiple disks that appear as a single
disk on the operating system. Spanning does not deliver any advantage
over using separate disks independently and does not provide fault
tolerance or other RAID performance benefits.