Filter
Top Products
5-305-30
5-305-30
5-30
Chapter 5: RAID configurationChapter 5: RAID configuration
Chapter 5: RAID configurationChapter 5: RAID configuration
Chapter 5: RAID configuration
3. Select
RAID-0 (High Performance, No Fault Tolerance) RAID-0 (High Performance, No Fault Tolerance)
RAID-0 (High Performance, No Fault Tolerance) RAID-0 (High Performance, No Fault Tolerance)
RAID-0 (High Performance, No Fault Tolerance) from
the
Select RAID Type Select RAID Type
Select RAID Type Select RAID Type
Select RAID Type menu, then press <Enter>.
Refer to the
Striping Requirements Striping Requirements
Striping Requirements Striping Requirements
Striping Requirements note at the bottom of the
screen to determine the number of hard disk drives required for the
selected RAID type.
2. The utility displays the installed SCSI hard disk drives status and menu
options. When available, the HDD status shows
FreeFree
FreeFree
F re e. Press <
CC
CC
C>.
The utility does not display an installed SCSI HDD(s) with an existing
RAID condiguration or is part of an existing RAID set. Use the
SCSI DiskSCSI Disk
SCSI DiskSCSI Disk
SCSI Disk
Utilities Utilities
Utilities Utilities
Utilities to reformat the HDD(s), or use the previous RAID card to
clear the RAID configuration on the HDD(s).