Filter
Top Products
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 Series
5-35-3
5-35-3
5-3
5.1.45.1.4
5.1.45.1.4
5.1.4
RAID configuration utilitiesRAID configuration utilities
RAID configuration utilitiesRAID configuration utilities
RAID configuration utilities
Depending on the RAID connectors that you use, you can create a RAID set
using the utilities embedded in each RAID controller. For example, use the
LSI Logic Embedded SATA RAID Setup Utility LSI Logic Embedded SATA RAID Setup Utility
LSI Logic Embedded SATA RAID Setup Utility LSI Logic Embedded SATA RAID Setup Utility
LSI Logic Embedded SATA RAID Setup Utility if you installed
SATA hard disk drives on the SATA connectors supported by the Intel
®
6300ESB Southbridge and/or the
Adaptec SCSISelect (TM) Utility! Adaptec SCSISelect (TM) Utility!
Adaptec SCSISelect (TM) Utility! Adaptec SCSISelect (TM) Utility!
Adaptec SCSISelect (TM) Utility! if
you installed SCSI hard disk drives to the SCSI connector supported by the
Adaptec
®
AIC-7901X RAID controller (NCLV-DS2 model only). Refer to the
succeeding sections for details on how to use each RAID configuration
utility.
If you want to boot the system from a hard disk drive included in a
created RAID set, copy first the RAID driver from the support CD to a
floppy disk before you install an operating system to the selected hard
disk drive. Refer to Chapter 6 for details.