Filter
Top Products
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 Series
5-235-23
5-235-23
5-23
Using the Objects commandUsing the Objects command
Using the Objects commandUsing the Objects command
Using the Objects command
To check data consistency using the
Objects Objects
Objects Objects
Objects command:
1. From the Management Menu, select
ObjectsObjects
ObjectsObjects
Objects, then select
LogicalLogical
LogicalLogical
Logical
Drive Drive
Drive Drive
Drive from the menu.
2. Use the arrow keys to select the logical drive you want to check, then
press <Enter>.
3. Select
Check Consistency Check Consistency
Check Consistency Check Consistency
Check Consistency from the pop-up menu, then press <Enter>.
4. When prompted, press <Y> to to check the drive.
5. When checking is complete, press any key to continue.