Filter
Top Products
5-505-50
5-505-50
5-50
Chapter 5: RAID configurationChapter 5: RAID configuration
Chapter 5: RAID configurationChapter 5: RAID configuration
Chapter 5: RAID configuration
5.5.25.5.2
5.5.25.5.2
5.5.2
Creating a RAID 0 set (Striped)Creating a RAID 0 set (Striped)
Creating a RAID 0 set (Striped)Creating a RAID 0 set (Striped)
Creating a RAID 0 set (Striped)
To create a RAID 0 set:
1. From the Adaptec RAID Configuration Utility initial menu, highlight
Array Configuration UtilityArray Configuration Utility
Array Configuration UtilityArray Configuration Utility
Array Configuration Utility, then press <Enter>.
2. From the Main Menu, select
Create ArrayCreate Array
Create ArrayCreate Array
Create Array, then press <Enter>.
3. Select the first drive you want to add to the array, then press
<Insert>. The selected drive appears in the
Selected DrivesSelected Drives
Selected DrivesSelected Drives
Selected Drives
section.
A RAID 0 set requires two identical hard disk drives.
4. When all the drives required for a RAID 0 set appear in the
SelectedSelected
SelectedSelected
Selected
Drives Drives
Drives Drives
Drives field, press <Enter>.