Filter
Top Products
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 Series
5-335-33
5-335-33
5-33
5.4.45.4.4
5.4.45.4.4
5.4.4
Creating a RAID 1 set (Mirror)Creating a RAID 1 set (Mirror)
Creating a RAID 1 set (Mirror)Creating a RAID 1 set (Mirror)
Creating a RAID 1 set (Mirror)
To create a RAID 1 set for Fault Tolerance:
1. Follow steps 1 to 2 of the
Creating a RAID 0 set Creating a RAID 0 set
Creating a RAID 0 set Creating a RAID 0 set
Creating a RAID 0 set section.
2. Select
RAID-1 (Fault Tolerance)RAID-1 (Fault Tolerance)
RAID-1 (Fault Tolerance)RAID-1 (Fault Tolerance)
RAID-1 (Fault Tolerance)from the
Select RAID TypeSelect RAID Type
Select RAID TypeSelect RAID Type
Select RAID Type
menu, then press <Enter>.
3. Use the arrow keys to select a RAID set member, then press
<SpaceBar> to mark. An
XX
XX
X mark appears after the selected HDD.
4. Follow step 3 to select the other members of the RAID set, then press
<Enter> when finished.
Refer to the
Mirroring Requirements Mirroring Requirements
Mirroring Requirements Mirroring Requirements
Mirroring Requirements note at the bottom of the
screen to determine the number of hard disk drives required for the
selected RAID type.