Filter
Top Products
2-222-22
2-222-22
2-22
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware information
4.4.
4.4.
4.
Keyboard power (3-pin KBPWR1)Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)Keyboard power (3-pin KBPWR1)
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
5.5.
5.5.
5.
VGA controller setting (3-pin VGA_EN1)VGA controller setting (3-pin VGA_EN1)
VGA controller setting (3-pin VGA_EN1)VGA controller setting (3-pin VGA_EN1)
VGA controller setting (3-pin VGA_EN1)
These jumpers allow you to enable or disable the onboard ATI
®
RAGE-XL PCI VGA controller. Set to pins 1-2 to activate the VGA
feature.
NCLV-D2 Series Keyboard power setting
KBPWR1
(Default)
+5V +5VSB
12
23
NCLV-D2 Series VGA Setting
VGA_EN1
Enable
(Default)
Disable
2
3
2
1