Filter
Top Products
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 Series
6-96-9
6-96-9
6-9
6. When asked if you will load additional RAID controller drivers:
• For NCLV-DS2 model, select
YesYes
YesYes
Yes,
then install the additional RAID
controller drivers for the Adaptec
®
AIC-7901X.
• For NCLV-D2/SATA model, select
YesYes
YesYes
Yes,
then install the additional
RAID controller drivers for the Adaptec
®
AIC-8130.
7. Follow screen instructions to continue the OS installation.
5. When prompted, insert the Red Hat
®
Enterprise ver. 3.0 RAID driver
disk to the floppy disk drive, select
OK, OK,
OK, OK,
OK, then press <Enter>.
The drivers for the RAID controller are installed to the system.