Filter
Top Products
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 SeriesASUS NCLV-D2 Series
ASUS NCLV-D2 Series
5-495-49
5-495-49
5-49
5.5.15.5.1
5.5.15.5.1
5.5.1
Configuring the hard disk drive(s)Configuring the hard disk drive(s)
Configuring the hard disk drive(s)Configuring the hard disk drive(s)
Configuring the hard disk drive(s)
You must configure the drive(s) that you want to include in an array.
To configure the drive(s):
1. From the Adaptec RAID Configuration Utility initial menu, highlight
Array Configuration UtilityArray Configuration Utility
Array Configuration UtilityArray Configuration Utility
Array Configuration Utility, then press <Enter>.
2. From the Main Menu, select
Configure DrivesConfigure Drives
Configure DrivesConfigure Drives
Configure Drives, then press <Enter>.
3. Select the drive(s) that you want to configure, then press <Insert>.
The selected drive appears in the
Selected Drives Selected Drives
Selected Drives Selected Drives
Selected Drives section. Repeat
the process to select other drives, then press <Enter>.
4. A warning message appears on screen. Press <Y> to configure the
selected drives, or press <N> to abort.