Filter
Top Products
5. Click Next to configure the Network or click the Network, Ports or Users link to open the
appropriate screen.
To configure network parameters:
1. Select the Network link in the content area.
2. Enter the Hostname, Primary DNS and Domain in the appropriate fields.
3. Select the IPv4 or IPv6 method for the ETH0 interface. If using Static, enter the Address,
Mask and Gateway in the appropriate fields.
4. Click Next to configure ports or click on the Security, Ports or Users link to open the
appropriate screen.
To configure Ports:
1. Select the Ports link in the content area.
2. Check the box(es) to enable all ports and/or to enable Cisco RJ45 Pin-Out to change the
pin-out when a Cisco cable is connected.
3. Use the appropriate drop-down menus to select the values for Speed, Parity, Data Bits, Stop
Bits, Flow Control, Protocol, Authentication Type and Data Buffering Status.
4. Select the Data Buffering Type. If using NFS, enter the NFS Server and NFS Path
information in the appropriate fields.
5. Click Next to configure users or click on the Network, Security or Users link to open the
appropriate screen.
To configure users and change the default user passwords:
WARNING: For securityreasons,itisrecommended youchangethe defaultpasswordfor bothrootandadmin
usersimmediately.
1. Select the Users link in the content area.
2. Click a username (admin or root) and enter the new password in the Password and Confirm
Password fields.
-or-
Click Add to add a user. Enter the new username and password in the appropriate
fields.
3. (Optional) To force the user to change the default password, select the User must change
password at next login checkbox.
4. Assign the user to one or more groups.
22 Cyclades™ ACS 6000 Advanced Console Server Installation/Administration/User Guide