Filter
Top Products
6. Click Next or click the Alerts link.
a. Click Enable Alerts to enable detection of alerts.
b. Click Add to add an alert string. Enter the string in the Alerts String field and click
Next to return to the Alerts screen.
c. Check the box next to an existing alert and click Delete to delete the string.
d. Click Delete Any to delete all strings whether selected or not.
NOTE: ClickingDeleteAnywilldeleteallalertstrings.Selectingallthealert stringsandclickingDeleteisnotthe
samefunctonasitwillnotdeletealertstringsnotshowninthetable.
7. Click Next or click the Power link.
a. Click Add to add a new outlet. Click Selected PDU and select a PDU from the list of
detected PDUs. Enter the outlet(s) in the Outlets field, and click Next.
b. Check the box next to an existing merged outlet and click Delete to delete it.
NOTE: Power isonlyavailablewhena singleserialport isselected.
8. Click Save.
Parameter Description
Physical
EnableCiscoRJ-45
Pin-Out
Definestheserialportpinout.Default:Disabled.
Status
Definesthestatusoftheserialport aseither enabledor disabled.
Default:Disabled.
Speed
Definesthespeedas300,1200,2400,4800,9600,19200,38400,
57600,115200 or 230400.Default:9600.
Parity Definestheparityaseither Even,Oddor None.Default:None.
DataBits Definesthedatabitsaseither 5,6,7or 8.Default:8.
StopBits Definesthestopbitsaseither 1or2.Default:1.
Flow Control
Definestheflow controlasnone,hardware,software,RxONsoftware
or TxON software.Default:None.
CAS
Table 3.5: CAS Profile Parameters
38 Cyclades™ ACS 6000 Advanced Console Server Installation/Administration/User Guide