Filter
Top Products
d. For Avocent/Cyclades PDUs, enter the power cycle interval and then use the drop-
down menus to enable or disable Syslog, Buzzer and SW Overcurrent Protection.
5. Click Save.
Parameter Description
Physical
EnableCiscoRJ-45
Pin-Out
Definestheserialportpinout.Default:Disabled.
Status
Definesthestatusoftheserialport aseither enabledor disabled.
Default:Disabled.
Speed
Definesthespeedas300,1200,2400,4800,9600,19200,38400,
57600 or 115200.Default:9600.
Parity Definestheparityaseither Even,Oddor None.Default:None.
DataBits Definesthedatabitsaseither 5,6,7or 8.Default:8.
StopBits Definesthestopbitsaseither 1or2.Default:1.
Flow Control
Definestheflow controlasnone,hardware,software,RxONsoftware
or TxON sofware.Default:None.
Power
PDU Type
Definesthetypeor vendor ofthePDU connectedtotheserialport.
• Auto- thevendor willbedetected.
• Avocent-Cyclades- Avocent-CycladesPMPDU family.
• SPC- SPCpower controldevicefamily.
• Server Tech- ServerTechfamily.
Default:Auto.
EnableSpeedAuto
Detection
Whenenabled,detectsthespeedof theport.Default:Disabled.
PoolingRate
Theintervalinsecondstoupdate informationfrom thePDU.Default:
20.
For Avo-
cent/Cyclades PDUs
Table 3.7: Power Parameters
Chapter 3: Accessing the Console Server via the Web Manager 43