Filter
Top Products
When the modem detects the escape sequence, the OK result Result code will be displayed
and the modem is in the On Line Command State. The ATH or ATZ command can now be
issued to disconnect the call.
Selecting country codes
Setting the modem’s country code is done by with the +GCI command. To change to one of
the 30 available countries, issue the AT+GCI=n command where “n” is one of the two digit
country codes. This command must be issued each the modem is turned on. It will not
automatically store or save this setting. It should be part of the Initialization string.
Example: AT+GCI=00<CR> Meaning: Change country code to Japan.
OK Meaning: The modem has accepted the command and is
now configured to operate in Japan
AT+GCI?<CR> Meaning: Display current country code
+GCI:00 Meaning: (Japan is the current country selected).
OK
To view which countries are available in the modems firmware, enter AT+GCI=?<CR>.
The modem will display all of the possible two digit country codes available.
Country Code Country Code Country Code
Australia 09 HongKong 50 Poland 8A
Austria 0A India 53 Portugal 8B
Belgium 0F Ireland 57 SouthAfrica 9F
Brazil 16 Italy 59 Singapore 9C
China 26 Japan 00 Spain A0
Denmark 31 Korea 61 Sweden A5
Finland 3C Mexico 73 Switzerland A6
France 3D Netherlands 7B Taiwan Fe
Germany 42 Norway 82 TBR21 FD
Table E.7: Country Codes List
89 Cyclades™ ACS 6000 Advanced Console Server Installation/Administration/User Guide