Filter
Top Products
5. When the PAP authentication protocol is configured for the port, select the authentication
type from the PPP/PAP Authentication menu.
6. Click Save.
To configure callback users and phone numbers for ports with the Dial-in Profile:
1. Select Ports - Dial-In Profile - Secure Dial-In - Callback Users.
2. Click Add.
3. Enter the name and phone number used to perform the callback in the appropriate fields
and click Save.
To configure PPP OTP users for ports with the Dial-in Profile:
1. Select Ports - Dial-In Profile - Secure Dial-In - PPP OTP Users.
2. Click Add.
3. Enter the username and passphrase in the appropriate fields and click Save.
NOTE: ThisPPPOPT user willestablishPPPconnectionafter beingsuccessfullyauthenticated.
To configure EAP-TLS as PPP authentication for ports with the Dial-in Profile:
1. Select Ports - Serial Ports.
-or-
Select Ports - Auxiliary Ports.
2. Check the box next to the port where the modem is connected and click Set Dial-In.
NOTE: Ifusinganauxiliaryport,the modemcanbeinternal.
3. Configure the PPP Address settings. For example, set the PPP Address to Local
Configuration using 10.0.0.1 as the Local IPv4 Address and 10.0.0.2 as the Remote IPv4
Address.
4. For PPP Authenticaion, select the button next to By Appliance, and then select the button
next to EAP for the protocol. Click Save.
5. Select Ports - Dial-In Profile - Settings.
6. Use the drop-down menu to enable the PPP Connection and click Save.
7. Copy the certificates and keys to the /etc/ppp/cert file. They must be named server.crt (the
ACS 6000 console server certificate), ca.crt (the Certificate Authority’s certificate) and
server.key (the ACS 6000 console server asymmetric key).
Chapter 3: Accessing the Console Server via the Web Manager 49