Filter
Top Products
System Tools
Click System Tools to display icons which can be clicked to reboot or shut down the console
server, upgrade the console server’s firmware, save or restore its configuration or open a
terminal session with the console server.
System
Click System to display information about the console server and allow an administrator to
configure the console server’s system parameters. The following tabs are listed under System in
the side navigation bar.
Security
Security Profile
ASecurity Profile determines which network services are enabled on the console server.
During initial configuration, the console server administrator must configure security parameters
to conform with the site security policy. The following security features can be configured
either in the web manager, CLI or the DSView 3 software:
• Configure the session idle time-out
• Enable or disable RPC
• Allow all users to access enabled ports or allow the configuration of group authorizations
to restrict access
• Select a Security Profile, which defines:
• Enabled services (FTP, ICMP, IPSec and Telnet)
• SSH and HTTP/HTTPS access
The administrator can select either a preconfigured Security Profile or create a custom profile.
All the services and the SSH and HTTP/HTTPS configuration options that are enabled and
disabled for each Security Profile are shown in the Wizard - Security and the System - Security
- Security Profile pages.
To configure a Security Profile:
1. Select System - Security - Security Profile.
2. In the Idle Timeout field, enter the number of minutes before the console server times out
open sessions.
24 Cyclades™ ACS 6000 Advanced Console Server Installation/Administration/User Guide