Filter
Top Products
NOTE: TheMAC Addressforthedevicewillbedisplayedafter thisoption.
NOTE: Thefollowingstepisonlyactivefor mountedEthernetPCcards.
7. Enter the following Wireless LAN information:
a. Select MyPrivateNet (ESSID) to enter the unique identifier for the wireless access
point.
b. Select Channel to enter the communication channel with the access point.
c. Select Encrypted to enable data encryption during transmission.
d. Enter the key or password to decode incoming encrypted data, then click Save.
IPv4 and IPv6 static routes
To add static routes:
1. Select Network - IPv4 Static Routes or IPv6 Static Routes. Any existing static routes are
listed with their Destination IP/Mask, Gateway, Interface and Metric values shown.
2. Click Add.
3. Select Default to configure the default route.
-or-
Select Host IP Or Network to enter custom settings for Destination IP/Mask.
Enter the required Destination IP/Mask Bits with the syntax <destination IP>/<CIDR>
in the Destination IP/Mask Bits field.
4. Enter the IP address of the gateway in the Gateway field.
5. Enter the number of hops to the destination in the Metric field, then click Save
Hosts
An administrator can configure a table of host names, IP addresses and host aliases for the local
network.
To add a host:
1. Select Network - Hosts.
2. Click Add to add a new host.
3. Enter the IP address, hostname and alias of the host you want to add, then click Save.
To edit a host:
1. Select Network - Hosts.
2. Click on the IP address of the hostname you want to edit.
Chapter 3: Accessing the Console Server via the Web Manager 31