Filter
Top Products
Parameter Description
Log-in/outMessage
Includesspecialnotificationfor loginsandlogoutsindatabuffering.
Default:Disabled.
SerialSessionLogging
Enabled- storesdataat alltimes.Disabled- storesdatawhenaCAS
sessionisnotopened. Default:Enabled.
Alerts
Status
Aspecialeventnotificationwillbegeneratedwheninputdatamatches
oneof thealertstrings.Default:Disabled.
AlertStrings Stringsusedtogenerateeventnotifications.Default:Empty.
To configure the Dial-in Profile for a serial port with a connected modem:
1. Select Ports - Serial Ports.
2. Click the checkbox for a serial port with a connected modem.
3. Click the Set Dial button and use the drop-down menus to configure the dial-in settings.
4. Configure the PPP parameters (address, authentication and so on) and click Save.
Parameter Description
Status Enablesor disablestheport.Default:Disabled.
Speed
Thespeedthat willbeusedbymgettytoconfiguretheserialdevice.
Default:38400bps.
InitChat Chatfor modeminitialization.Default:"" \d\d\d+++\d\d\dATZ OK.
PPPAddress
Configuresthelocalandthe remote IPaddressforthethePPPlink.If
AcceptConfigurationfrom RemotePeer isselected,the remotepeer
shouldsendbothIPaddresses(localandremote) duringnegotiation.
Default:NoAddress.
LocalIPv4/IPv6
Address
ConfiguresthelocalIPv4/IPv6addressforthisPPPconnection.
RemoteIPv4/IPv6
Address
Configurestheremote IPv4/IPv6addressforthisPPPconnection.
Table 3.6: Dial-in Parameters
Chapter 3: Accessing the Console Server via the Web Manager 41