Filter
Top Products
4. Setup
7. Press ENTER
The language is adapted and a black bullet shows the active configuration.
4.8.2 Quick access keys
What can be done ?
The 3 function keys on top of the RCU can be associated with a particular item in one of the menus.
Each function which is not password protected or does not have a key on the RCU can be associated to a function key.
How to get an overview of the quick access keys ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Quickaccesskeys
Image 4-15
5. Press ENTER
A text box appears on the screen.
How to program the quick access keys ?
1. Scroll through the menus to the desired menu item
2. Push the desired function key for 3 seconds
F1
F2
F
3
MEN
U
BA
C
K
Image 4-16
The menu item is stored in the quick access key
Factory pre-programmed functions
-F1 : color depth
-F2 : noise reduction
-F3 : orientation
4.8.3 Automatic startup
What can be done ?
The automatic startup allows to bypass the standby state i.e. start up without going in standby state after switching on the projector.
34
R59770134 ID LR-6 27/05/2011