Filter
Top Products
2. ClickShare Specifications
• When the system is awake, a short push triggers the system to go into standby mode.
• When the system is in standby mode, a short push triggers the system to wake up.
• When the s ystem is powered on, a long push makes the system to shut down and power off.
• When the s ystem is shut dow n, a long push or short push triggers the system to start up.
Back layout of the Base Unit
At the back of the B ase Unit you can find the rocker switch, the label, the ports and c onnectors of the Base Unit.
1 2 3 4 5 6 7 8 9 10 1
Image 2-4
Backside of the B ase Unit
1
Fixture points for the antenna
2
Label containing the article number and power rating of the product
3 Mains power connector
4Rockerswitch
5 DVI-I display connector
6 DisplayPort connector
7 LAN Ethernet connection
8
4 USB ports
9 Audio In port
10
Audio Out port
Rocker switch
The rocker switch is used to power on and off the Base Unit.
• ToswitchontheBaseUnit,settherockerswitchto“I”.
• To shut down the system, set the rocker switch to “0”.
Mechanical fixture points
The mechanical fixture points are located at the bottom of the Base Unit
Antenna
Two antennas are included in the C lickShare box. To avoid damage during transport, they are not pr e-mo unted. Depending on the
installation method you should secure the antenna to the ba ck of the B ase Unit or to the front panel of the rack mount.
The antennas can rotate for a better wireless connection.
Usage of antennas other than the ones provided with the unit are allowed within the res trictions on usage of other antennas defined
by local regu lations. B arco does not take responsibility for damage or disturbance of other de vices that may be caused by using a
different antenna. The use of a
n active power amplifier is not allowed.
10
R5900004 CLICKSHARE 19/08/2014