Filter
Top Products
4. ClickShare installation
European version
Type C and type G
Japanese version Type A
Chinese version Type I CCC
North Am e rica n version Type A
2. To power on the unit, set the rocker switch to “1”.
If the Base unit does not start up automatically, use the standby button.
The standby button at the front can now fully control the unit.
Image 4-12
Standby button
The standby button has the following functions:
- When the system is awake, a short push triggers the system to go into standby mode.
- When the system is in standby m ode, a short push triggers the system to wake up.
- When the system is powered on , a long push causes the system to shut down and power off.
- When the system is shut down, a long pus h or short push triggers the system to start up.
4.11 Connecting an iOS device
The o ptional Hardware add-on ClickShare L ink is n eeded to connect an iOS device.
About an iOS device connection
The ClickShare Link allows users to get the content from an iOS device touchscreen to the large meeting room screen. The iOS
device behaves like an additional laptop. Note that the C lickShare Link only s treams video, sound is not supported.
The ClickShare Link is to be attached to t he (rear) USB port of the ClickShare Base Unit.
For the iOS device itself, there are two ways to connect to the ClickShare Link:
• Cable connection, requires an HDMI a dapter for iOS device.
• Wireless, requires an Apple TV. AirPlay needs to be activated on the iOS device.
R5900004 CLICKSHARE 19/08/2014
27