Filter
Top Products
4. ClickShare installation
How to connect
1. Insert a network c able with RJ-45 connector into the LAN port.
Image 4-10
LAN connection
2. Connect the other side to a LAN.
4.10 Power connection and switching on
WARNING: Use a power cord which complies to local regulations. If not included in the box, contact your
local dealer for a correct power cord.
How to connect
1. Plug the power cable in the mains power connector at the back of the Base Unit
Note: The local v ariant of the power cable is included in the ClickShare box.
Image 4-11
Power connection
26 R5900004 CLICKSHARE 19/08/2014