Filter
Top Products
4. ClickShare installation
- Return to the Home page of the Apple TV.
Image 4-28
- Calibrate the ClickShare Link to the Apple TV menu by going into the Click Share Base Unit web interface. By calibrating the
Link, we make sure that the Apple TV m enu is not shown in the ClickShare com position. iOS content will only be shown w hen
an iOS device is actually sharing via AirPlay. For more info about the calibration procedure, see "Calibrating a ClickShare
Link", page 63.
Note: Minimum Apple TV version 3 is required, Apple TV must support 1080p.
9. iOS device user should connect to the same network the Apple TV is conn ected with and he should start the sharing by enabling
AirPlay mirroring. F or more information on how to s et up, consult the iPad’s user guide.
Note: Always use A irPlay mirroring. Do not use Streaming.
When the Apple TV is connected to the internet
These are additional steps to execute when the Apple TV is connected to the public internet. It is not optional to have the Apple TV
connected to the internet, for the ClickShare experience this is not required.
1. Remove the lowest row of icons as follow:
a) Go to Settings → Main menu
b) Select the service you want to hide
c) Select Hide from the options.
d) Repeat until all services are hidden.
Image 4-29
2. Calibrate the ClickShare Link to the Apple TV menu by going into the ClickShare B ase Unit web interface.
During the calibration procedure, click w ith the rem ote control to the right so that the 4 icons (Movies, M usic, Computers, Settings)
are selected one by one and the calibration procedure can be finished.
R5900004 CLICKSHARE 19/08/2014
31